24
initio
®
1
Access the Windows 95 CD-ROM from either the DOS prompt or from Microsoft Win-
dows 3.x File Manager. Execute the SETUP.EXE program and follow the instructions on
your screen. If you are installing from floppy diskette, insert the Windows 95 Setup Disk
1 in your floppy disk drive and boot your system. Follow the instructions on your
screen.
2
Once a Windows 95 session is established, use your installed mouse or the appropriate
key strokes to select
MY COMPUTER
from the MAIN DESKTOP. Execute the following
steps:
Select
CONTROL PANEL
from within the MY COMPUTER icon.
Select
SYSTEM
from within the CONTROL PANEL group
Select
DEVICE MANAGER
tab from within the SYSTEM group
Select the
OTHER DEVICES
category from within the DEVICE MANAGER listing.
Select the
PCI-SCSI Bus Controller
sub-category from within the OTHER
DEVICES listing.
In the Initio PCI-SCSI Bus Controller Properties window, select the
DRIVER
tab
,
then select
CHANGE DRIVER...
.
In the SELECT HARDWARE TYPE window, select
SCSI CONTROLLERS
.
In the SELECT DEVICE window, select
HAVE DISK...
.
3
In the INSTALL FROM DISK window, enter the Initio Driver path name:
Insert the
INI-9XXXU/9XXXUW DRIVER DISK 1
into drive A:
Type:
A:\WIN95
, select
OK
4
Select
Initio INI-9XXXU/UW PCI SCSI Host Adapter
, select
OK
, then
OK
again to install the INI910U.MPD driver onto your hard disk drive.
It may be necessary
to direct Windows to look for the driver in A:\win95 before the driver can be copied. This step may
need to be repeated more than once.
5
Following installation of the Initio INI-9XXXU/UW Windows 95 driver for all channels,
reboot your system to activate the SCSI device driver.
6
It is highly recommended that you Initios Windows 95 device driver has been
properly installed by selecting
MY COMPUTER
from the desktop. Then select
CONTROL PANEL
:
Select
SYSTEM
from within the CONTROL PANEL group,
Select
DEVICE MANAGER
from within the SYSTEM group,
Select
SCSI CONTROLLER
from within the DEVICE MANAGER listing, and
Select
Initio INI-9XXXU/UW PCI SCSI Host Adapter
from within the SCSI
CONTROLLER listing. If This device is working properly is displayed on your
screen, the driver has been correctly installed.
Microsoft Windows 95/95b (OSR2) Driver Installation
Summary of Contents for INI-9090U
