46
Using the system
Centrali anti-intrusione
3. Press
to confirm and exit.
4. If the shortcut is associated with “Arm/Disarm” operations, the application will
ask you to select a scenario. If the associated shortcut is “Activate output” or
“Deactiv. output”, the application will ask you to select the output.
• ActivatableOutputs - this section allows the user to enable/disable the outputs the
code is allowed to control manually:
User
menu,
Outputs ON/OFF
.
1. Use keys
and
to select the desired output.
2. Use keys
and
to enable/disable manual control of the output for the
code concerned.
3. Press
to confirm and exit.
• Timers - this section allows you to assign a timer to the code. The code will be
operative only at the pre-set times.
• Type - this section allows you to assign a level (rank) in the system hierarchy to the
selected code.
• Enablements - this section allows you to enable/disable access to the various
sections of the user menu.
The programming steps are identical to those of “Outputs ON/OFF”.
5-16
Timer programming
This section allows the programming of all the timers the user has access to.
You can program two “ON” times and two “OFF” times for each day of the week.
A timer can be associated with a:
• Partition - if the timer is enabled and the partition is enabled for automatic-arming
operations (refer to paragraph 5-4 Activations)), the partition will arm when the
timer switches ON and disarm when the timer switches OFF.
• Code - if a code is associated with a timer, it will be enabled to operate the system
when the timer switches ON, and disabled when the timer switches OFF.
• Key - if a key is associated with a timer, it will be enabled to operate the system
when the timer switches ON, and disabled when the timer switches OFF.
If you wish to associate a timer with a partition or a code, you must access the
respective section in the user menu. The association of timers with keys must be done
by the installer during the programming phase.
Via Keypad
Access the “Timers” section of the user menu by typing-in a valid code PIN.
1. Use keys
and
to select the Timer thenpress
.
2. Using the same keys, select the day of the week.
3. Select an activation or a restoral of the timer.
4. Set the selected time (expressed in hours and minutes) by means of keys and
then, using keys
and
select the number.
5. Press
to confirm and exit.
Note
It is possible to programme only timer activation or only timer restoral.
Enter “--:--” in the field you do not wish to program.
TIMER 001
Activation 1
Activation 2
Restoral 1
TIMER 001
Sunday
Monday
Tuesday
User Code
Nexus Teleserv.
Codes
Timers
Timers
TIMER 001
TIMER 002
TIMER 003
TIMER 001
--:--
