34
Using the system
Centrali anti-intrusione
Note
All the timers will be activated automatically when you exit the programming session. You must
deactivate timers which are not used for system control purposes.
• Dialler - a deactivated (disabled) dialler cannot send voice or digital calls. However,
if duly programmed, it will be able to manage incoming calls.
• Answerphone function - if activated (enabled), the control panel will answer incoming
calls with the prerecorded voice message (“Answerphone message”).
• InternetTeleser. - if activated when the Answerphone option is enabled, the
control panel will answer incoming calls with the prerecorded voice message.
• Teleservice - if activated (enabled), the installer will be able to access the system
via modem. The teleservice call allows the installer to work on the control panel
parameters. Teleservice operations involve a request from you and the installers
acceptance, therefore, this option needs to be enabled only when required.
Note
If the “Answerphone” and “Teleservice” functions are both enabled, the control panel will give
incoming-call priority to the teleservice call. After picking up the call, the control panel will allow the
installer-company modem 30 seconds to establish communication. If the modem fails to
communicate within this period, the control panel will play the pre-recorded “Answerphone” voice
message.
• Internet access - If this option is enabled, and the system is equipped with a
SmartLAN/G board, the control panel will allow user-authorized access to the system
via LAN/Internet. If this option is disabled, the control panel will allow user-
authorized access to the system via teleservice (if authorized).
• Enable install. - If enabled, the Installer PIN will be accepted by the system and
the installer will have access to the Installer menu. If disabled, entry of the installer
PIN will generate an “Invalid Code” event and the installer will be denied access to
the respective menu.
• Sync IP2RX - if activated, the control panel will send a specific string to the IP2RX
software in order to allow its identification.
• Cloud enrollment - this option allows the SmartLiving panel to access INIM
Electronics cloud service (future use).
Via Keypad
Method 1
Activate the shortcuts associated with keys
, ...,
(shown on the display) with
or without code entry:
• The shortcut assigned to the “Activations menu” (shortcut n.15:
), allows you
to view the respective section in the user menu, where you can:
1. Use keys
and
followed by
to select the category of elements you
wish to activate/deactivate (zones, codes, etc.).
2. Use keys
and
followed by
to select the single element you wish to
activate/deactivate.
3. Use
to activate the selected element or
to deactivate it.
• Other shortcuts which provide direct access to sub-sections of the “Activations”
section are:
•• Shortcut n.19 (
) accesses “Activations/Zones”
•• Shortcut n.22 (
) accesses “Activations/Answerphone”
•• Shortcut n.23 (
) accesses “Activations/Teleservice”
•• Shortcut n.24 (
) accesses “Activations/Codes”
•• Shortcut n.25 (
) accesses “Activations/Keys”
•• Shortcut n.26 (
) accesses “Activations/Timers”
•• Shortcut n.27 (
) accesses “Activations/Auto-arm”
Method 2
Access the “Activations” section of the user menu by means of a valid code PIN.
Follow the instructions described in Method 1.
Via Alien touch screen
Access the “Menu” section by tapping
, type-in the user code and then access the
“Activations” section.
18:23 01/02/2016
DDDDDDD
User Code
Arm/Disarm ops.
Voice functions
Activations
ACTIVATIONS
Zones
Codes
Keys
Type in code
******
Method 2
Method 2
Method 2
ZONE ACTIVATIONS
Panel T01
Panel T02
Panel T03
Method 1
