20
Installation
Telephone dialler
4-4
Telephone connections
Connect the PSTN line to terminals 17 and 18 (Table 2-2 "Terminals
on the terminal board").
Note
SmartLinkAdv is protected against eventual lightning strikes.
Connect the telephone equipment (or other device/apparatus that
requires a reserve telephone line) to terminals 15 and 16.
Up to 4 devices can be connected in parallel.
ATTENTION!
A voltage of up to 100Vdc may be present on terminals 15 and 16
during the ring phase.
Note
In the presence of an ADSL, it is necessary to connect the SmartLinkAdv
downstream of the ADSL filter, on the line where the telephone devices are
connected (this line is clearly indicated on the filters).
4-5
Earth connection
Terminal 14 must be connected to earth and connected
equipotentially to terminal 2 (Table 2-2 "Terminals on the terminal
board").
ATTENTION!
This operation is necessary in order to comply with the security
requirements of the telecommunications network, and also to
protect the device against overload and/or electrical discharge
coming from the external telephone line.
4-6
Inserting the SIM card
Deactivate the PIN code of the SIM card and insert it into its housing
(table 2-1, E).
The SIM card must be inserted when the system is Off (not
powered).
ATTENTION!
There is a risk that phone numbers and/or SMS messages contained
in the SIM card may be lost when it is inserted into the
SmartLinkAdv.
Before choosing the GSM network provider and inserting the SIM
card (refer to paragraph 5-2 Easyscan procedure), it is advisable to
use the Easyscan function from the SmartLeague software program
in order to identify the best GSM network signal.
