70
1.
Choose
System > System Time
to display the
System
Time
page.
2.
The IG502 can obtain the time of the PC as its local time.
3.
Click Sync next to the Device Time field.
Method 4: Enable SNTP clients.
1.
Choose
System > System Time
to display the
System
Time
page.
2.
Select Enable SNTP Clients.
3.
Set the parameters. For details about these parameters, see
SNTP client parameter description.
4.
Click Submit to apply the configuration.
4.7.2.
System Logs
Choose
System > Log
to display the
Log
page. This page displays a large amount of
information about the network and IG502, such as its running status and changes of
configuration. On the
Configure
page, you can set a remote log server. Then, the IG502 will
synchronize all system logs to the remote log server. The host used as the remote log server
must run a remote log program (for xample,
Kiwi
Syslog
Daemon).
4.7.3.
Configuration Management
Summary of Contents for InGateway502
