42
•
Interface: specifies the interface through which data packets are forwarded to
the destination network.
•
Gateway: specifies the IP address of the next router that data packets pass
through before reaching the destination IP address.
•
Distance: specifies the priority of the route. A smaller value indicates a higher
priority.
•
Track ID: specifies the track index or ID.
4.5.4.
Firewall
4.5.4.1.
ACL
An access control list (ACL) permits or denies specified data flows (such as the
data flow from a specified source IP address or account) based on a series of
matching rules to filter the data reaching a network interface. You can
configure a data filtering policy for a network interface on the
ACL
page. The
configuration procedure is as follows:
1.
Choose
Network > Firewall > ACL
to display the
ACL
page.
2.
Click the Add icon under
Access Control Policy
to add an access control
policy.
Summary of Contents for InGateway502
