InHand InGateway502, User Manual

Page: 51 / 107

47
•
Parameters of an extended access control policy are described as follows:
•
ID: specifies the ID of an ACL rule, in the range of 100-199. A smaller
value indicates a higher priority of the rule.
•
Sequence Number: specifies the sequence number of the ACL rule.
A smaller value indicates a higher priority of the rule.
•
Action: permits or denies forwarding of matching packets.
•
Protocol: specifies the access control protocol.
•
Source IP: specifies the source IP address of packets in the ACL rule.
If this field is kept blank, the rule matches packets from all networks.
•
Source Wildcard: specifies the wildcard mask of the source IP
address in the ACL rule.
•
Source Port: specifies the source port number of packets. The
value any indicates that TCP/UDP packets with any source ports
match the rule. This parameter is available only when the TCP or
UDP protocol is selected.
•
Destination IP: specifies the destination IP address of packets in the
ACL rule. If this field is kept blank, the rule matches packets destined
for all networks.
•
Destination Wildcard: specifies the wildcard mask of the destination
IP address in the ACL rule.