Ingrasys nastorage 12600 series User Manual Download Page 91

Page: 91 / 158

4.3.3 Storage > Folder Groups > Folder Group Options

You can go to the details of a shared Folder Group using the Edit, Move, Permission,

Snapshots, and User Quota tabbed menus.

Before you begin any configuration, select a target Folder Group using the

Select Target

Folder

menu.

Edit

: Click this button to edit the following attributes such as storage

Quota

Reservation

Access Time

Read Only

rights, and so on.

NOTE:

•

The 4600U/T series does not support the Dedup and Copy functions. Neither can you

disable the the Sync function using the 4600U/T series.

•

The 4600U/T supports the Compression function.

•

The Copy function is not available on the 12600U series.

Summary of Contents for nastorage 12600 series































































































































































Search results

Summary of Contents for nastorage 12600 series

Reviews:

Related manuals for nastorage 12600 series

Brands by name

Popular brands

Ingrasys nastorage 12600 series, User Manual

Search results

Summary of Contents for nastorage 12600 series

Reviews:

Related manuals for nastorage 12600 series

Brands by name

Popular brands