Installation Manual
Ingecon® Sun Three-Phase Inverter
Pg. 27 de 40
Ref.: AAS2000IKI02
Rev.:_ Dec-2009
7.3
Main menu
Main menu has four submenus:
MONITORING.
Main parameters and internal variables are shown here. This data inform about the
Status of the equipment.
STOP REASONS.
Five last Stop Reasons are shown here.
AJUSTSMENTS:
All adjustsments of the inverter are shown here.
INVERTER DATA.
Inverter data are shown here.
12:00 09/01/09
MAIN PRINCIPAL
MONITORING
STOP REASONS
ADJUSTSMENTS
INVERTER DATA
7.4 Monitoring
Access by pressing
OK
once selected MONITORING.
12:00 09/01/09
MAIN PRINCIPAL
MONITORING
STOP REASONS
ADJUSTSMENTS
INVERTER DATA
Listed below is a description of the variables in each particular screen:
Screen 1.
Pac: Power the inverter is delivering to the Power Grid in kW.
Pdc: Power provided by the solar panels in kW.
Etot:
Total energy in kWh delivered by the inverter to the Grid since it left the
factory. The recording of the serial number on the unit marks the start of this
power record.
E.Par:
Total energy in kWh delivered by the inverter to the Grid since last time
generated power record was set to zero.
