9.7. Change date
This menu can be used to change the current time and date.
The internal clock automatically changes between summer and
winter time.
Each time the
key is pressed, the top of the display flashes
in the following order: hour; minutes; day; month; and year, to
show the present value.
Use the up and down keys
and
respectively, to
change the value of any part of the time or date. By clicking
on
when the year is flashing, the new date and time are
changed. The following message is then displayed:
Click on
once more, to confirm the selection.
17:32
30/04/12
Change date
17:32
30/04/12
Change date
17:32
30/04/12
17:32
30/04/12
9.8. Start/Stop
This menu can be used to manually start or stop the operation
of the inverter.
The Start or Stop status will not change even if the power supply
to the inverter is cut off.
17:32
30/04/12
17:32
30/04/12
Click on
to change from one status to the other. The
following message will be displayed:
Select the desired option and click again on
.
The stop status is maintained until the menu is accessed once
more.
17:32
30/04/12
17:32
30/04/12
9.9. Partial Data Reset
This menu serves to zero the partial counters:
Part E
,
Tp con
and
Npcon
.
Click on
to zero the counters. The following message will
be displayed:
17:32
30/04/12
Partial Data Reset
17:32
30/04/12
Partial Data Reset
62
Ingeteam Inc
Installation manual
AAY2000IKI02
