Terminals to connect
+6
G1
G2
L2 L1
N
-6
U models
The upper anchor bar supports the equipment weight.
The lower point secures the transformer to the wall and prevents vibrations.
To secure the transformer to the wall, follow the steps detailed below:
1.
Mark the bar anchor points on the wall.
2.
Drill holes in the wall with a bit recommended for the screw subsequently to be used to secure the bar to
the wall.
3.
Secure the bar with rawl plugs and stainless steel screws in order to prevent rust.
4.
You are recommended to use lag screws, washers and rawl plugs appropriate for securing the bar.
AAY2000IKI02
Ingeteam Inc
Installation manual
31
