Book 35393065 (7/02)
27
( )
80
I
.88
I
mounting holes
32.85
I
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ---- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ---- -- -- -- -- --
|
|
|
|
|
|
outside dimension
of base
1.56
I
1.38
I
|
|
|
|
|
|
29.73
I
77.24
I
Figure X
Mounting Holes
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Figure Y
cooling air inlet
Do Not Block
Do Not Block
Cooling Air Clearance Dimensions
minimum clearance
for cooling air inlets
minimum clearances for
cooling air exhaust.
Do Not Block
cooling air inlets
Do Not Block
-- --
-- --
-- --
-- --
8
I
2
I
48
I
12
I
cooling air inlets
both ends
UTILITY PACKAGE SET--UP
(no running gear)
INSTALLATION
The unit must be secured to a vehicle bed using mounting holes provided, to prevent unwanted motion of the unit while
running or transporting. See Figure X for mounting holes provided in base.
The air going into the inlet grilles must be relatively free of oil, dirt, soot and other debris. It must be no more than 10 degrees
F. (5 degrees C) over the ambient temperature.
The inlet and outlet grilles must not be restricted. See Figure Y for recommended clearance around the compressor. The
cross--sectional area of any ductwork must be larger by a minimum of 10 percent.
The addition of any power--absorbing components (hydraulic pumps, paint mixers, etc.) must be approved by
Ingersoll--Rand to maintain the warranty. Units with the optional engine--mounted auxiliary drive are approved for hydraulic
pumps up to 15 HP.
CAUTION:
Units with the optional engine mounted auxiliary drive and/or 4.5 kw generator can potentially overload the
engine if the combination of air, hydraulic power and electrical power exceeds the Horsepower capability of the engine. This
can lead to damage to the engine. Refer to Figure Z for the maximum HP available for the auxiliary drive.
High loading/continuous operation requires engine oil changes at 1/2 normal interval.
Summary of Contents for P130WJDU
Page 28: ...Book 35393065 7 02 28 Figure Z...
