Book 35393065 (7/02)
51
( )
MARKINGS AND DECALS
NOTICE
Do not paint over safety warnings or instructional
decals. If safety warning decals become illegible,
immediately order replacements from the factory.
Part numbers for original individual decals and their
mounting locations are shown within Parts List
Section. These are available as long as a particular
model is in production.
Afterwards, service sets of exterior decals and current
production safety warning decals are available.
Contact the Product Support Group at Mocksville for
your particular needs and availability.
HOW TO USE PARTS LIST
a.
Turn to Parts List.
b.
Locate the area or system of the compressor in
which the desired part is used and find illustration
page number.
c.
Locate the desired part on the illustration by visu-
al identification and make note of part number
and description.
HOW TO ORDER
The satisfactory ordering of parts by a purchaser is
greatly dependent upon the proper use of all available
information. By supplying your nearest sales office,
autonomous company or authorized distributor, with
complete information, you will enable them to fill your
order correctly and to avoid any unnecessary delays.
In order that all avoidable errors may be eliminated,
the following instructions are offered as a guide to the
purchaser when ordering replacement parts:
a.
Always specify the model number of the unit as
shown on the general data decal attached to the
unit.
b.
Always specify the serial number of the unit.
THIS IS IMPORTANT. The serial number of the
unit will be found stamped on a plate attached to
the unit. (The serial number on the unit is also
permanently stamped in the metal of the frame
side rail.)
c.
Always specify the number of the parts list pub-
lication.
d.
Always specify the quantity of parts required.
e.
Always specify the part number, as well as the
description of the part, or parts, exactly as it is
given on the parts list illustration.
In the event parts are being returned to your nearest
sales office, autonomous company or authorized dis-
tributor, for inspection or repair, it is important to in-
clude the serial number of the unit from which the parts
were removed.
TERMS AND CONDITIONS ON PARTS ORDERS
Acceptance:
Acceptance of an offer is expressly lim-
ited to the exact terms contained herein. If purchas-
er’s order form is used for acceptance of an offer, it is
expressly understood and agreed that the terms and
conditions of such order form shall not apply unless
expressly agreed to by Ingersoll--Rand Company
(“Company”) in writing. No additional or contrary
terms will be binding upon the Company unless ex-
pressly agreed to in writing.
Taxes:
Any tax or other governmental charge now or
hereafter levied upon the production, sale, use or ship-
ment of material and equipment ordered or sold is not
included in the Company’s price and will be charged to
and paid for by the Purchaser.
Shipping dates shall be extended for delays due to
acts of God, acts of Purchaser, acts of Government,
fires, floods, strikes, riot, war, embargo, transportation
shortages, delay or default on the part of the Compa-
ny’s vendors, or any other cause beyond the Compa-
ny’s reasonable control.
Should Purchaser request special shipping instruc-
tion, such as exclusive use of shipping facilities, in-
cluding air freight when common carrier has been
quoted and before change order to purchase order
can be received by the Company, the additional
charges will be honored by the Purchaser.
Summary of Contents for P130WJDU
Page 28: ...Book 35393065 7 02 28 Figure Z...
