Ingersoll-Rand M200-LV, Operation And Maintenance Manual, Page: 30 / 38

OPERATING INSTRUCTIONS
28
M200–LV M250–LV
–ALARM HISTORY–
barg 7,5 barg
ALARM HISTORY 1
MAIN MOTOR OVERLOAD
READY TO START ALARM HISTORY 2
HIGH AIREND DISCH TEMP
STATUS MAIN MENU SELECT
ALARM HISTORY
Alarm History displays each of the Alarm messages for the last 15
Alarms experienced by the machine. It also gives access to displaying
the machine operating conditions that existed at the time of each Alarm.
The first one shown, “Alarm History 1”, was the most recent Alarm to
occur. Note that multiple, consecutive EMERGENCY STOP Alarms
are not recorded as separate Alarms, only the first one will be shown.
Each of the last 15 Alarm messages can be seen by moving the
Alarm History list up and down using the arrow buttons. Pressing the
SELECT button when one of the Alarms is highlighted will display the
list of machine values that existed at the time that particular Alarm
occurred.
–ALARM HISTORY 1–
barg 7,5 barg
PACKAGE DISCH PRESSURE
13,7 barg
READY TO START PACKAGE DISCHARGE TEMP
54
_
C
STATUS MAIN MENU ALARM HIST.
The name and value of each of the items listed below can be seen
by moving the list up and down using the arrow buttons. Pressing the
ALARM HIST. button will return the display to the ALARM HISTORY
screen.
ALARM HISTORY Items
Package Discharge Pressure
Package Discharge Temperature
Airend Discharge Temperature
Injected Temperature
Sump Pressure
Separator Press. Drop
Coolant Filter
Inlet Vacuum
Inlet Filter
Total Hours
Loaded Hours
% Load Modulation
Alarm histories can be exited by pressing either the STATUS or
MAIN MENU buttons. If no buttons are pressed within 30 seconds, the
display will return to the CURRENT STATUS screen.
WARNING
barg 7,5 barg
CHANGE INLET FILTER
RUNNING UNLOADED PRESS RESET TWICE
MODE: MOD/ACS
STATUS MAIN MENU RESET
When a Warning occurs, the word WARNING will flash on the
display screen and appear in large letters as shown above. The display
message will indicate what caused the warning.
If multiple Warnings exist, the small up/down arrows will appear in
the upper right corner of the display screen. The multiple Warnings can
be seen by pressing the up and down arrow buttons. Pressing the
STATUS button will display the CURRENT STATUS screen with the
WARNING button indicating that a Warning still exists.