Balloon Light BL2000B
10
4900059 (04-06)
Operation and Maintenance Manual
Maintenance
Repair
Figure 7
1.
Cut a patch out of the self-adhesive fabric sheet of the
repair kit, big enough to entirely cover the damaged
part of the envelope.
2.
Remove the protective film from the self-adhesive side
of the created patch.
3.
Stick the patch on the damaged part of the envelope.
Replacement
1.
Unscrew the nut located on the top of the Balloon
BL2000B.
2.
Open the zip.
3.
Unscrew and remove the 8 plastic thumb wheels
[Figure 3].
4.
[Figure 8] Remove the evelope [3] and fabric grip ring
[5] via the bottom side of the equipment [1] by sliding
it along the power supply cable [4].
Figure 8
5.
Procede in reverse order to install the new envelope.
Make sure that the bottom side of the envelope is
properly sealed by the fabric grip ring.
Air filter
Replacement
Figure 9
1.
Remove the air filter (sponge) [3] from the south pole
[1] by making it slide along the support stand [2].
2.
Install the new air filter in reverse order.
Reference
Description
1
Internal equipment
2
Zip
3
Envelope
4
Power supply cable
5
Fabric grip ring
S1715
S1734
1
2
3
4
5
IMPORTANT
The air filter must be immediately checked &
cleaned or replaced if the fan starts to make an
abnormally high noise. Failure to do so could
cause the fan to overheat and break down.
Reference
Description
1
South pole
2
Support stand
3
Air filter (sponge)
S1716
3
1
2
