4900059 (04-06)
11
Balloon Light BL2000B
Operation and Maintenance Manual
Fault finding
Fault finding
Contents
Introduction .....................................................................................................................................................................11
Electrical diagram............................................................................................................................................................11
Fault finding chart............................................................................................................................................................12
Introduction
The trouble shooting chart that follows includes some of the problems that an operator may encounter during the
operation of the Balloon.
The chart does not attempt to list all of the problems that may occur, nor does it attempt to give all of the answers to solve
the problems. The chart does give those problems that are most apt to occur.
Electrical diagram
Figure 10
S3554
230VAC
10/16A
PLUG
3G 1.5mm² HO7RNF CABLE
LINE VOLTAGE 230VAC/50Hz
POWER 2000W
MAXIMUM AMBIENT TEMPERATURE 45°C
FAN
230VAC
50Hz
N
Pe
L
JUNCTION TERMINAL
WAGO 222-415
JUNCTION TERMINAL
WAGO 222-415
SAFETY TERMINAL SWITCH
120°C
FIT IN FRONT OF THE LAMP
(TIP)
4*HALOGEN LAMP
TYPE:R7S 230VAC
50Hz 500W 114mm
(TIP)
LAMP CONNECTOR
2 PINS
LOCABLE
LAMP WIRES: 2.5mm² SILICONE
L
Pe
N
FAN CAPACITOR
230Vac
2µF
2 FIXED JUNCTIONS
AMP. INSULATED
(CRIMPED)
MAIN JUNCTION
TERMINAL
L
1
L
2
N
Pe
