160831
Page 1 / 4
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
T0251
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Read and save these instructions.
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
T
Important to Know
1. Read all instructions carefully before installation and
operation.
2. If you are not familiar with state and local electrical
codes, it is recommended that you consult with a
qualified electrician.
3. Before installation, shut off power at the main fuse or
circuit breaker box. Be aware that simply turning off
the wall switch is not sufficient to prevent an electrical
shock.
4. This fixture requires a 120 VAC, 60 Hz power source.
Maximum wattage light bulb is 60W.
5. Do not attempt to take the lantern apart; there are
no serviceable parts inside.
6. To avoid sensor damage by lightning or electrical
surge, make sure the grounding wire is securely
connected.
7. For general safety and to avoid any possible damage
to the sensor, be sure the power is switched "off"
before replacing the bulb.
Maximum Wattage: 60W
Work Temperature: -4
0
F ~ 104
0
F
Features
2.Use the dim-to-bright illumination option where
1.Energy saving fixture.
you want some minimum illumination through out
the night, such as at your front entrance or garage
door. Use the dark-to-bright illumination option
where you do not need minimum brightness, such
as the backyard or back porch.
3.When in manual override mode, use wall switch
to keep the light on till dawn.
Hardware Package (included)
Green Grounding
Screw
Mounting Screw
X2
Wire Nut
X3
Lock Nut
X4
Ball Nut
X2
Mounting Plate
X1
Headless Screw
X2
Rubber Pad
X2
Fig.1
Mounting Screws
Headless Screws
Mounting plate
House Grounding Wire
Green Grounding Screw
Fixture Grounding Wire
Wire Nut
Outlet Box
Fixture Wire
Lock Nuts
Back Plate
Ball Nut
Rubber Pad
Max.60W Type A
standard base bulb
(Bulb not included)
Back Plate
Metal Ring
Glass Shade
Set Screw
Frame
