4900059 (04-06)
7
Balloon Light BL2000B
Operation and Maintenance Manual
Operating Instructions
Assembly and installation
Unfolding the envelope
1.
Unfold the envelope on a smooth, clean surface.
2.
Open the zip.
Assembling (bulb installation)
Note: This operation is necessary before using the
equipment for the first time. Afterwards, the
bulbs may be left installed for transport.
1.
Open the zip.
2.
Unscrew the plastic thumb wheels and remove the
envelope.
Figure 3
3.
Remove the protective bowl from the fan part.
Figure 4
4.
Place the 4 bulbs in their respective lamp holders
inside the protective bowl.
Figure 5
5.
Put the protective bowl back on the fan part.
6.
Put the envelope back in place.
7.
Tighten the thumb wheels.
8.
Close the zip.
S1710
S1711
IMPORTANT
Handle the bulb with the supplied gloves. We
recommend cleaning the bulb with methylated
spirits before each use.
WARNING
If a bulb breaks or cracks inside the balloon,
disconnect the electrical power supply and
disassemble the envelope to remove the fragments
of glass.
Use a vacuum cleaner to clean the equipment. Be
careful not to cut your fingers when handling the
fragments of glass.
S1712