39
2.2.4 Inspection every 250 hours or 3 months
Be sure to check the following points every 250 hours or 3 months operation, whichever comes first.
No.
Inspection Item
(1)
Oil and filter replacement
(2)
Inspection and cleaning of radiator fin
(3)
Adjustment of governor lever and accelerator device
(4)
Air cleaner element cleaning
(5)
Fan belt tension inspection and adjustment
(1) Oil and filter replacement (The second replacement and after)
Replace the engine oil every 250 hours operation from 2nd time and on. Replace the engine oil filter at the
same time. Refer to 2.2.1.(1).
(2) Inspection and cleaning of radiator fin
Beware of dirt from air blowing
Wear protective equipment such as goggles to protect your eyes when
blowing compressed air. Dust or flying debris can hurt eyes.
Dirt and dust adhering on the radiator fins reduce the
cooling performance, causing overheating. Make it a rule
to check the radiator fins daily and clean as needed.
Blow off dirt and dust from fins and periphery with
compressed air [0.19MPa (2kgf/cm
2
) or less] not to
damage the fins with compressed air.
If contaminated heavily, apply detergent,
thoroughly clean and rinse with tap water shower.
IMPORTANT:
Never use high-pressure water or air from close by fins
or never attempt to clean using a wire brush. Radiator
fins can be damaged.
