30
2.2 Periodic Inspect ion and Maintenance Procedure
2.2.1 Check before Daily O peration
Be sure to check the following points before starting an engine every day.
No.
Inspection Item
(1)
Visual inspection of engine outside
(2)
Fuel Inspection
(3)
Oil Inspection
(4)
Cooling Water Inspection
(5)
Accelerator
(6)
Alarm device and Panel
(1) Visual check around engine.
If any problem is found, do not use before the engine repairs have been completed.
Oil leak from the lubrication system
Fuel leak from the fuel system
Cooling water leak from the cooling water system
Damaged
parts
Loosened or lost bolts
Fuel, radiator rubber hoses, V belt cracked, loosened clamp
(2) Checking and refueling
Check the remaining fuel oil level in the fuel tank and refuel the recommended fuel if necessary. (Refer to
1.3.(1) )
(3) Checking oil level and replenishing with
engine oil
(a) Checking oil level
Check the engine oil level with the dipstick, after
adjusting the posture of the machine unit so that an
engine may become horizontally. Insert the dipstick
fully and check the oil level. The oil shall not be
contaminated heavily and have appropriate viscosity.
No cooling water or diesel gas oil shall be mixed.
If, check the oil level after about 10 minutes passes
after the engine shutdown so that oil inside the engine
may be returned in the oil pan when oil is supplied
after the engine running.
Standard
The level shall be between the upper and lower
limit lines on the dipstick.
