Nets One PA user guide | 39
Configuring ethernet settings
The terminal models iCT250, Spire countertop and Lane 5000 support connectivity over ethernet. In order to
configure it, see the procedure below. The default setting is with DHCP, and you would only need to follow this
procedure to configure it to use static IP addressing.
Press the Menu key and navigate to settings menu by pressing 0
or using arrow keys and OK button
Press 4 or navigate to Communication by using the arrow keys
and press OK
Press 2 or navigate to Ethernet by using the arrow keys and
press OK
Press 2 or navigate to static IP by using the arrow keys and
press OK
The terminal will now ask for Terminal IP address. Key it in and
press OK.
If you want to navigate to the next octet without keying in the full
3 digits, press the comma key above the OK button.
