Infortrend EonNAS Pro Series Hardware Manual Download Page 7

Page: 7 / 68

About This Manual

About This Manual

This manual introduces the hardware components of EonNAS Pro NAS systems and

describe how to install, operate and maintain them.

For the following subjects, please consult other resources for more information:

Components that are not user-serviceable: Contact our support sites.

Software operation: Consult the User Manual in the CD-ROM.

Revision History

Version Date

Description

1.0

December, 2011

Initial release

1.1 February,

2012

Updated

certificates

Updated

LCD power saving functions

Updated

support of single hard drive for initialization

Updated

Contact Information

1.2 May,

2012

Merged EonNAS Pro 200, 500, 800 & 850 series into

EonNAS_Pro_Series_HMN.

Updated

component compatibility notice

1.3 June,

2012

Updated

restore to default

actions

1.4

August, 2012

Updated 10Gb iSCSI descriptions

1.5

December, 2012

Added EonNAS Pro 210, 510 & 810

Summary of Contents for EonNAS Pro Series





































































Search results

Summary of Contents for EonNAS Pro Series

Reviews:

Related manuals for EonNAS Pro Series

Brands by name

Popular brands

Infortrend EonNAS Pro Series, Hardware Manual

Search results

Summary of Contents for EonNAS Pro Series

Reviews:

Related manuals for EonNAS Pro Series

Brands by name

Popular brands