EonNAS Pro Series Hardware Manual
Hardware Installation
Component Compatibility
The use of compatible components is strongly recommended to ensure compatibility,
quality and normal operation with your system. Please contact your vendor for a list
of compatible components.
Before You Start
Items received in the package:
The NAS system and hard drive trays (preinstalled into the system)
Two Ethernet cables
Quick installation guide
CD-ROM
Power
cable
There are some tools and components that are user provided:
a small size flat-blade screwdriver for unlocking and locking hard drive trays
At least one 3.5 inch SATA hard drive (up to 3TB per drive is supported).
NOTE
Users
MUST
install at least one hard drive into slot 1 to setup the system.
WARNING
For internal airflow and safety reasons, please remove only one hard drive tray
at a time and never leave two or more hard drive bays empty without drive tray!
Airflow Concerns
Allow 20cm of ventilation clearance around the enclosure. Make sure cables are also
placed well clear of the ventilation area behind the enclosure and away from foot
traffic.
24
