EonNAS Pro Series Hardware Manual
Powering On the System for the First Time
The initialization process only occurs if it is the first time you power on your system.
Before you power-on, please make sure you have done the following:
1. Have a Windows OS PC ready for use.
2. Install at least one (1) hard drive into enclosure’s hard
drive slot 1 for the initialization process.
3. For 850 series, make sure the ATX power switch is in
the “OFF” position (shown on the right).
4. Make sure you have connected the following:
One end of the Ethernet cable to Ethernet port 1 (indicated by the
blue circle
)
and the other end into a switch.
The adaptor plug / power cable to the power socket (indicated by the
blue
rectangle
) and the other end into a power outlet.
EonNAS
1
2
5. Power-on peripheral devices first (eg. switches, routers, servers, PCs, etc.).
6. For 850 systems, turn the ATX power switch to the “ON” position.
NOTE
To manually setup the system, users can log in using the default Ethernet 1 IP address
<10.0.0.2>; default Ethernet 2 IP address <10.0.0.3>; default username:
admin
, default
password:
admin
.
For details, please refer to the Web Interface Manual for details.
30
