EonNAS Pro Series Hardware Manual
Quick Initialization Using Systems’ LCD Screen
NOTE
The quick initialization method is NOT the recommended way to initialize the system
as default settings will be applied. Changes can later be made using its GUI interface.
Approximately 5 minutes after pressing the power button (if the user is near the
system, after pressing the power button, a beep will sound after 2 minutes and two
beeps will sound 3 minutes thereafter) the following message will appear on the LCD:
Press the “Select” button to move the cursor to “Yes”, press the “Enter” button and the
system will begin the automated process and the screen will show “Initializing…”.
SE LEC T
E NTE R
I n i t i a l i z i n g . . .
SE LEC T
E NTE R
Q u i c k i n i t i a l i z e
- > Y e s N o
When initialization has completed, the LCD will show the following:
SE LECT
E NTE R
R e b o o t i n g . . .
The reboot process takes approximately 3 minutes.
If you press the “Enter” button with the cursor pointed at No, it will bring you to the
main system menu screen, which is described in the following section.
SE LECT
E NTE R
E o n N A S _ P r o _ x x x
x x x . x x x . x x x . x x x
SE LECT
E NTE R
Q u i c k i n i t i a l i z e
- > Y e s N o
35
