EonNAS Pro Series Hardware Manual
System Error Buzzer
Note:
For systems without a LCD screen
, if you hear an error buzzer, please log into the
system through a browser and check the system log.
The LCD module provides basic action(s) and monitoring statuses only, it is
recommended that in an event of an error, users log into the web-interface to get a
better picture of the overall system statuses!
If your system has encountered an error, a single beep buzzer alarm will sound
continuously until you manually turn it off and a “Mute Buzzer -> Yes No” prompt will
show on the LCD module. With the arrow pointed at “Yes”, press the “ENTER” button
to turn off the buzzer.
SELECT
EN TER
M u t e b u z z e r ?
- > Y e s N o
Once an error has occurred, users must log into the web interface and check the
system logs to identify the issue(s). Below is a list of the possible triggering events and
simple countermeasures.
1.
CPU or system temperature
exceeded the threshold limit:
When you have determined the CPU or system temperature is the
cause of the system error, please check for obstructions in front of and
behind the system enclosure to ensure normal airflow is sustained. If
error persists, please contact
technical support
.
2.
System fan
failure:
When you have determined the system fan has completely failed or is
operating below its normal rev range, please contact
technical support
.
3.
Hard drive failure:
When you have determined a hard drive or hard drive(s) have failed.
Press the “ENTER” button with the arrow pointed at “Yes” to mute the
buzzer.
58
