EonNAS 1000 Series Hardware Manual
50
3.4 EonNAS Initialization Process
NOTE
Turn off Windows firewall
:
To turn off the Windows firewall, please refer to the instructions below.
Windows 7/ Vista
:
Click on the Start button > Control Panel > Security > Windows Firewall >
turn off Firewall. You may be prompted for an administrator password or
confirmation, type the password or provide confirmation.
Windows XP
:
Click on the Start button > Control Panel > Windows Firewall > turn off
Firewall.
1. Approximately 5 minutes after pressing the power button (if the user is near
the system, after pressing the power button, a beep will sound after 2 minutes
and two beeps will sound 3 minutes thereafter) double click on EonOne.exe
found in the “fscommand" folder on the CD. EonOne window will appear.
2. Select your preferred interface language.
3. Wait for your NAS system to appear in the list. Highlight the system and
proceed to the next step.
Name
Model
IP Address
NAS_1100
NAS-1100
10.0.0.2
NOTE
If your EonNAS system was not found
•
Make sure your PC and EonNAS are connected to the same switch / router!
•
Try turning off the antivirus’ firewall (please refer to its manual) then close the
EonOne and go back and start from step 3.
•
Please refer to the setup instructions in the User Manual on the CD.
