EonNAS 1000 Series Hardware Manual
41
2.7.3
Removing the Enclosure
*
Prior to removing the enclosure, power down your system (stop all I/O actions,
please refer to Users’ manual) and all hard drives have been removed!
*
It is strongly recommended that two people work together on this procedure.
To remove the enclosure, make sure the system has been turned off, all cables have
been disconnected and all hard drives have been removed. Gently pull the system
out on the slide rail until it has reached it’s full extension on the rail, a hook (
in blue
)
can be located on the left side of the enclosure, gently push down in the direction of
the blue arrow to disengage the enclosure from the slide rail and pull out the
enclosure.
