EonNAS 1000 Series Hardware Manual
49
3.3
Status LED When Powered-on
Press the power button (shown below)
1U EonNAS front panel
2U / 3U EonNAS
Front panel power button
For 1U EonNAS systems
The system status LED
should remain off to indicate the system is operational and
the Ethernet 1 & 2 LEDs
should light up (flashing) if they
are connected; users can also
check if the system is powered
on by looking at the hard disk
drive status LED (indicated by
the
green arrow
) on the bezel
tray.
For 2U / 3U EonNAS systems
When turned on, the service LED should remain off
while the rest of the status LEDs on the front panel
should light up green to indicate normal operation.
Service LED: Off
Power LED:
Green
Cooling fan LED:
Green
Thermal LED:
Green
System fault LED:
Green
