CT-MSEC ASSEMBLY INSTRUCTIONS
PAD ASSEMBLY
C1.
Assemble the Exercise Pad to the Exercise Arm using 1 – ¾” x 2 ½” Shaft, 1 – 3/8”
x 3 ¾” bolt, 2 – 3/8” flat washers and 1 – 3/8” nut.
C2.
Insert the 1” x 4” Shaft into the bushings of the Thigh Pad Assembly. Assemble the
Thigh Pad Assembly to the Exercise Arm Frame Assembly by first pulling the pop
pin. Then insert the guide pin into the slot and rotate the bushing and shaft down
between the plates at the top hole. Release the pop pin. Secure the Thigh Pad
Assembly using 1 – 1/2” x 5 ½” bolt, 2 – 1/2” flat washers, and 1 – 1/2” nut.
C3.
Depress the ratchet lever on the Seat Frame and insert the chrome Back Support.
Secure with a 3/8” x 1” bolt with blue patch in the threaded fitting below.
C4.
Attach the Back Pad to the Back Support using 2 - 3/8” x 2 ½” bolts with blue patch
and 2 – 3/8’ flat washers.
C5.
Attach the Bottom Pad to the Seat Frame using 2 - 3/8” x 2” bolts with blue patch, 1-
3/8” x 3” bolt with blue patch and 3 – 3/8” washers.
8
8
1 - 4 1/2" Pulley
1 - 3/8" x 2" Bolt
2 - 3/8" Flat Washers
1 - 3/8" Nut
1 - 4 1/2" Pulley
1 - 3/8" x 1 3/4" Bolt
2 - 3/8" Flat Washers
1 - 3/8" Nut
1 - 4 1/2" Pulley
1 - 3/8" x 2" Bolt
w/ blue patch
1 - 3/8" Flat Washers
1 - 4 1/2" Pulley
1 - 3/8" x 2 1/4" Bolt
2 - 3/8" Flat Washers
1 - 3/8" Nut
1 - 4 1/2" Pulley
1 - 3/8" x 1 3/4" Bolt
2 - 3/8" Flat Washers
1 - 3/8" Nut
E2
E3
E4
E5
E6
B
1 - Lower Cable
1 - 4 1/2" Pulley
1 - Pulley Bracket
1 - 3/8" x 2" Bolt
2 - 3/8" Flat Washers
1 - 3/8" Nut
Cable end in hook
13
E7
E1
