CT-MSEC ASSEMBLY INSTRUCTIONS
MAIN STRUCTURE ASSEMBLY (continued)
B1.
Assemble the Exercise Arm Frame Assembly to the assembly made in Step A2
using 2 – 3/8” x 4 ¾” bolts, 4 – curved washers and 2 – 3/8” nuts. Do not fully tighten
the bolts at this time.
B2.
Assemble the Support Assembly to the lower tube of the Exercise Arm Frame
Assembly and to the Main Upright using 4 – 3/8” x 4 ¾” bolts, 8 – curved washers,
and 4 – 3/8” nuts. Do not fully tighten the bolts at this time.
B3.
Assemble the Support Assembly to the pivot flange of the Exercise Arm Assembly
using 2 – 3/8” x 2 ½” bolts, 2 – 3/8” flat washers, and 2 – 3/8” nuts.
B4.
Attach the Forward Seat Support to the Seat Frame using 2- 3/8” x ¾” bolts with
blue patch and 2 – 3/8” flat washers, and to the Exercise Arm Assembly using 1 –
3/8” x ½” bolt with blue patch and 1 – 3/8” washer.
FULLY TIGHTEN ALL BOLTS AT THIS TIME
B5.
Attach the Handle Assembly to the Seat Frame using 2 - 3/8” x 4 ¾” bolts, 4 – 3/8”
washers and 2 – 3/8” nuts. Tighten these bolts.
6
6
