9.
AREA SET
z
Set serial number for 16 areas
z
Define title for 16 areas
z
Area display switch
z
Set boundaries among 16 areas
10.
DEFAULT SET
z
Set the parameters to factory defaults.
z
Reset Camera
11.
EXIT
z
Exit the main menu.
4.3 Camera Information
The SET CAMERA ID menu is generally used to display the
current serial number (S/N) and camera ID number of the domes.
The users could enter a new serial number or enable the password
protection.
CURRENT S/N
Function:
Display the current serial number of the domes.
INPUT S/N
Function:
Allow a user to enter a new serial number.
Operation:
To input a desired serial number,
1.
Move the cursor to the first digit entry;
2.
Deflect the joystick downward (or upward) to toggle through
available numbers (0 ~ 9);
3.
When the desired number is displayed, move the cursor to the
next digit entry;
4.
Repeat Steps 2 through 3 until the entire serial number is entered.
CAMERA ID
Function:
Display the current ID number for the domes.
Note:
The camera ID number can be selected via the DIP switch of
S1. For details on S1 settings, please refer to
Installation Guide
.
PASSWORD SET
Function:
Set/change system access password.
Operation:
To input a desired system access password
1.
Move the cursor to the first
*
symbol;
2.
Push the joystick upward (or downward) to toggle through
available numbers (0 ~ 9);
3.
After choosing the desire number, move the cursor to the next
*
symbol,
4.
Repeat steps 2 through 3 until entering of the whole password is
finished.
CONFIRM PASSWORD
Function:
Input the same password as the “PASSWORD SET”
entry to confirm a new password.
Operation:
Follow the steps described in “PASSWORD SET” to
input the confirming password.
Note:
If the confirming password is incorrect, the system will deny
return to the main menu, and display the following information to
require correct password setting and confirmation:
CURRENT S/N
INPUT S/N : 20060530001
CAMERA ID : 001
PASSWORD SET :
CONFIRM PASSWORD :
PASSWORD ENABLE : OFF
RETURN
PASSWORD NOT MATCH
VER : XXXXX XXXXX
******
******
PASSWORD ENABLE
Function:
Enable/disable the password protect feature.
Operation:ON -
enable the password protect feature, i.e. require
entering system access password before access the main
menu.
OFF -
(default) disable the password protect feature.
VER:
Version No.
Function:
Show current operation program version number..
4.4 Camera Setup
The CAMERA SETUP menu provides configuration for most
lens/optics parameters.
SET CAMERA ID
CAMERA SETUP
SET AE MODE
OSD SETUP
CONFIG HOME POSITION
ALARM ACTION AND STATE
AUTOPAN SET
PATTERN SET
AREA SET
DEFAULT SET
EXIT
DIGITAL ZOOM :
ZOOM SPEED :
IRIS DEFAULT :
IRIS MODE:
BACKLIGHT :
WB MODE :
WB-R :
WB-B :
FOCUS MODE:
RETURN
OFF
HIGH
M/A
OFF
AUTO
000
000
AUTO
DIGITAL ZOOM :
ZOOM SPEED :
IRIS LEVEL:
IRIS MODE:
BACKLIGHT :
WB MODE :
WB-R :
WB-B :
FOCUS MODE:
RETURN
OFF
HIGH
128
M/A
OFF
AUTO
000
000
AUTO
For 18X/26X/36X domes
IRIS DEFAULT :
9
For 22X/23X/35X domes
128
DIGITAL ZOOM
Function:
Enable/Disable digital zoom. Determine digital zooming
multiple.
Options:
OFF
– Disalbe digitao zoom function (default)
0/02X-0/12X -
Zooming multiple is from 2 to 12. With
full capacity of optic zoom, releasing button first then
pressing button to enter the digital zoom status.
01X-12X -
Zooming multiple is from 1 to 12. With full
capacity of optic zoom, pressing button continuously to
enter the digital zoom status.
Note:
It cannot enter the
0/02X-0/12X
digital zoom status when
using the pattern. (For 36X, 26X domes and 18X domes with
FCB-45CP camera, there are only ON/OFF options: namely
9
