Infinite Peripherals Stimare DPP-255 User Manual Download Page 9

Page: 9 / 49

DPP-255 Mobile Printer User Manual

Page 8 of 48

UM-00017 Version: A

GETTING STARTED

Before Using Your DPP-255 Printer

• Remove the device and any included accessories from the shipping carton and verify contents

against your packlng list.

• Retain all packing materials, invoice, and bill of lading. These may be required to return the

printer for servicing later, or to process a claim with the carrier.

• Carefully inspect the packaging and contents for any signs of damage. If there are signs of

damage, DO NOT attempt to use the unit. Notify your account executive or contact IPC

technical support at

[email protected]

Your

DPP-255 Printer

includes the following items:

DPP-255 Printer

Battery Pack (installed)

Paper Roll (installed)

AC Adapter

Belt Clip

Fixing Screw (2 pieces)

USB Cable

Data Cable

*Note:

Box contents and part numbers may vary based on ordered configuration.

Summary of Contents for Stimare DPP-255


















































Search results

Summary of Contents for Stimare DPP-255

Reviews:

Related manuals for Stimare DPP-255

Brands by name

Popular brands

Infinite Peripherals Stimare DPP-255, User Manual

Search results

Summary of Contents for Stimare DPP-255

Reviews:

Related manuals for Stimare DPP-255

Brands by name

Popular brands