manualshive.com logo in svg

Infinite Peripherals Stimare DPP-255, User Manual

Share
Download
Infinite Peripherals Stimare DPP-255 User Manual Download Page 12

DPP-255 Mobile Printer User Manual  

 

 

 

 

 

 

                      Page 11 of 48 

UM-00017  Version:  A

 

       

DPP-255 PRINTER FEATURES

The DPP-255 is a mobile thermal printer which allows data input from computers and other host 

systems through Serial (RS232C), USB and Bluetooth (MFi or SPP).  The versatile functions built in the 

series make it possible to use for several data output applications.

•  Max 100mm/sec high-speed printing (Using peeler unit : Max 62.5mm/sec) 
•  Rugged body design.  Drop Rating of up to 1.5m 
•  Water and dust resistant comply to IP54 with carry case 
•  Drop-and-load design. 
•  Wide operating environment
•  Multiple settings 

•  Adustable Line Spacing

•  Variable Paper Guide

•  Paper feed

•  Print density

•  Print capability for:

•  Barcode and 2-dimensional code printing HEX dump and test printing

•  Large characters

•  Graphic by bit image

•  Downloaded and user-defined characters

•  Table layout

•  Page Mode allows erect/inverse images, clockwise 90 degrees/counter-clockwise 90 degrees and 

overlapping printing.

•  Graphic data can be registered.
•  Command system conforms to ESC/POS
•  Numerous character codes supported

 

Summary of Contents for Stimare DPP-255


















































Reviews:

No comments

Brands by name

Popular brands

Load more brands