DPP-255 Mobile Printer User Manual
Page 17 of 48
UM-00017 Version: A
CHARGING YOUR DPP-255
Before using the DPP-255 thermal printer, the battery should be properly charged. The DPP-255 uses
a Lithium Ion rechargeable battery pack. Before first use, the battery pack should be charged for at
least 3 hours.
1. Pull the DC Jack Port cover tab back and Insert the AC adapter into the port.
2. Insert the AC adapter plug into an outlet to begin charging.
Figure 8: DC Jack Port
CAUTION:
To prevent electrical damage to the DPP-255 and/or battery pack, please use approved AC
Charger only.
After completing initial battery charge, monitor battery status and recharge, as needed. If the operating
time of a fully charged battery becomes too short, battery may need to be replaced.
