DPP-255 Mobile Printer User Manual
Page 19 of 48
UM-00017 Version: A
Installing a Paper Roll
The DPP-255 uses a drop-and-load design, making paper loading easy and trouble free. To load a
paper roll, simply lift up the paper cover latch and drop in the new roll as shown in the steps below.
1. Press the Paper Cover Release button to open the cover
(Figure 10)
.
Figure 10: Paper Cover Release
2. Gently pull the paper guides apart
(Figure 11a)
and insert the paper roll so that the end of the
paper roll faces the back of the printer and comes up from the bottom of the compartment
(Figure 11b)
.
3. Pull the end of the paper roll so that it is sticking slightly outside of the paper feed area and close
the cover.
Figure 11a: Paper Guide
Figure 11b: Paper Roll
WARNING:
Handle the paper cutter carefully to avoid potential injury to fingers and hands.
Be sure that the thermal head is cool before replacing the paper roll. Thermal head may be very hot
immediately after printing. Touching the thermal head white hot may result in burn injuries.
