DPP-255 Mobile Printer User Manual
Page 20 of 48
UM-00017 Version: A
Setting the Peeler Unit for Labels
1. Insert the label stock into the printer with the end of the label roll sticking out of the feeder
approximately 1-1/2 inches (40 mm). Close the cover.
2. Raise the peeler unit arm and pull the label-end toward the back of the printer.
3. Lower the peeler unit to secure the label stock place.
4. Press the Feed button on the front of the printer to set the position of the label paper.
Figure 12: Setting the Peeler Unit
