. . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc.
Page 34
www.ipcprint.com
PP-55 Resident Command Set Version 1.01
Detailed Description
GS w n
Selecting the horizontal size (Scale factor) of the bar code
[Code] <1D>H
<77>H<n>
[Range] {2 <= n <= 4}
[Outline] Selecting bar code width.
n denotes the number of dots in fine element width.
[Default] • The initial value of this width is "3".
GS h n
Selecting the height of the Bar Code
[Code] <1D>H<68>H<n>
[Range] {1 <= n <= FFh}
[Outline] Selecting bar code height.
n denotes the number of dots in the vertical direction.
[Default] • The initial value of n is "162".
GS H n
Selecting of Printing Position of HRI Code
[Code] <1D>H<48>H<n>
[Range] {0 <= n <= 3}
[Outline] Selecting printing position of HRI code in printing bar codes.
• "n" means the followings.
0 No printing
1 Above the bar code
2 Below the bar code
3 Both above and below the bar code
The HRI code refers to the bar code-turned characters so that you can read
them.
[Caution] The HRI code is printed in the font selected with GS f. Specify before the
GS k command.
[Defult] • The initial value of n is "0".
[See Also]
GS f
