. . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc.
Page 9
www.ipcprint.com
PP-55 Resident Command Set Version 1.01
Detailed Description
ESC SP n
Setting the right space amount of the character
[Code]
<1B>H<20>H<n>
[Range]
{0 <= n <= 20h}
[Outline] The rightward space amount is set in dot unit (1/203 inch unit).
[Caution] The rightward space amount in double wide mode is made
double of the set volume.
[Default]
n
=
0
ESC ! n
Collective Specifying Printing Mode
[Code]
<1B>H<21>H<n>
[Range]
{0 <= n <= FFh}
[Outline] Printing mode is assigned. Each n bit indicates the following:
Bit
Function
Value 0
Value 1
0
Character Font
Font A
Font B
1 Undefined
2 Undefined
3 High-lighting Cancelled
Specified
4 Double
height Cancelled
Specified
5 Double
width Cancelled
Specified
6 Undefined
7 Underline Cancelled Specified
[Caution] • With double height and double width being specified
simultaneously,
double
wide and double high characters
are
consisted.
• An underline is attached to the full character width, which,
however, is not attached to the part having been
skipped
by
the
horizontal
tab. Neither is it attached to
9
-right-turned
characters.
• The underline width is as having been specified by <ESC - >.
(The default setting is 1 dot width)
• In case that double wide character and normal character exist
in same one line, the layout of underline is consistent
one.
[Default]
n
=
0
[See Also] ESC E, ESC –
