. . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc.
Page 16
www.ipcprint.com
PP-55 Resident Command Set Version 1.01
Detailed Description
If bit 3 is set to ‘1’ before the data of each track is put a byte
corresponding to the track number (F1h for first, F2h for second and F3h
for third).
If the most significant bit is set to ‘1’ the timeout for reading a card is 2
minutes, if not set – 10 seconds.
ESC @
Restore saved to nonvolatile RAM settings
[Code] <1B>H<40>H
[Outline] Clears data stored in the print buffer and brings various settings to the
initial state (The last state before execution of ESC ^ command).
[Caution] • Data inside the internal input buffer are not cleared.
[See also]
ESC ^ and ESC _
ESC D [ n ] k NUL
Setting Horizontal Tab Position
[Code] <1B>H<44>H [ <n> ] k<00>H
[Range] {0 <= n <= FFh}
{0 <= k <= 20h}.
[Outline] Specifying a horizontal tab position.
• "n" indicates the no. of columns from the beginning to the horizontal tab
position. At this time, n= set position 1 is to be specified. For example, to
set the position at 9th column, n=8 is to be specified.
• k denotes the number of horizontal tab positions you want to set.
• The tab position is set at position where it is "character width x n" from
the line beginning. The character width, at this time, includes the rightward
space amount. In double wide characters, it is made double of the ordinary
case.
• Tab positions can be specified are maximum 32. Specifying exceeding
this is ignored.
• <n> k, which denotes a setting position, is input in the increasing order
and ends at <00>H.
• ESC D NUL clears all the set tab positions. Following clearing, horizontal
tab command is ignored.
[Caution] When the data, <n> k, is equal to or smaller than its preceding data,
<n>k-1, it is assumed that tab setting is finished. If this is the case, the
next data onward will be processed as normal data. When the data, <n> k,
exceeds a 1-line print area, set the horizontal tab position, assuming "Set
digit position = Maximum print 1." The horizontal tab position does
not change even if the character width is altered after setting the
horizontal tab position.
