. . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc.
Page 18
www.ipcprint.com
PP-55 Resident Command Set Version 1.01
Detailed Description
ESC J n
Printing and feeding paper n/203 inch
[Code] <1B>H<4A>H<n>
[Range] {0 <= n <= FFh}
[Outline] Prints data inside the print buffer and feeds paper by n/203 inch. Since an
actual mechanical pitch is 1/203 inch, it is internally converted
approximate to the value specified with this command.
• Specified volume does not remain.
• The beginning of the line is to be considered as the next printing start
position.
• Initial value is not defined.
ESC M n
Specifying/canceling highlighting
[Code] <1B>H<4D>H<n>
[Range] {0 <= n <= FFh}
[Outline] Selects character font.
• "n" is valid only for the lowest bit (n0).
• Control by the lowest bit (n0) is shown as follows:
0 Selection of font A (12x24).
1 Selection of font B (9x16).
[Caution] ESC ! can also select fonts, but the setting made by the command
processed last is valid.
[See also]
ESC !
ESC S n
Selecting serial interface speed
[Code] <1B>H<53>H<n>
[Range] {0 <= n <= 6}
{“0” <= n <= ”6”}
[Outline] Sets serial interface speed.
• "n" means the followings.
0 or “0” Sets speed to 1200 bps
1 or “1” Sets speed to 2400 bps
2 or “2” Sets speed to 4800 bps
3 or “3” Sets speed to 9600 bps
4 or “4” Sets speed to 19200 bps
5 or “5” Sets speed to 57600 bps
6 or “6” Sets speed to 115200 bps
