. . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc.
Page 19
www.ipcprint.com
PP-55 Resident Command Set Version 1.01
Detailed Description
[Caution] • Once changed the serial port speed can be changed only by another ESC
S command or by detaching the battery.
• The printer and the PDA (or the PC) must be set to the same speed in
order to make the communication possible.
• The current serial interface speed is printed during self-test.
[Default] • The initial value of n is "6" or 115200 bps.
ESC T
Printing diagnostic information
[Code] <1B>H<54>H
[Outline] Printing current intensity level, temperature, voltage, and serial port
speed.
[See also]
ESC .
ESC V n
Specifying/Canceling 90º -right- turned Characters
[Code] <1B>H<56>H<n>
[Range] {0 <= n <= 1}.
[Outline] Specifying/canceling characters 90º -right- turned character.
• "n" means the followings.
0 Canceling 90º -right- turned Characters
1 Specifying 90º -right- turned Characters
[Caution • No underlines are attached to 90º -right- turned characters .
[Default] • The initial value of n is "0".
ESC Y n
Selecting the intensity level
[Code] <1B>H<59>H<n>
[Range] {0 <= n <= 5}
[Outline] Set the intensity level.
• "n" means the followings.
0 Set intensity 70 %
1 Set intensity 80 %
2 Set intensity 90 %
3 Set intensity 100 %
4 Set intensity 120 %
5 Set intensity 150 %
[Caution] • Higher intensities can cause a lower speed.
[Default] • The initial value of n is 3.
