Infineon BTS7002-1EPP, User Manual

Page: 6 / 26

2 Board description
For a safe and sufficient functionality, discrete components are necessary: please refer to the datasheet to
check which components are needed. The next Figure 3 , Figure 4 and Figure 5 show the schematics plus the
corresponding layout of the PROFET ™ +2 Arduino Shield and the bill of materials (BOM). In the Appendix of the
user manual are attached the schematics and the PCB layout.
2.1 Schematics
In the following Figure 3 the schematics of the PROFET
™
+2 Arduino Shield are shown. The schematics are based
on the application circuit in the BTS700x-1EPP datasheets.
Figure 3 Schematics PROFET
™
+2 Arduino Shield
2.2 PCB layout
The next Figure 4 and Figure 5 show the PCB layout of the PROFET
™
+2 Arduino Shield devided into top and
bottom layers.
PROFET
™
+2 12V Arduino Shield
2 Board description
User Manual 6 Rev. 1.00
2019-10-23