Figure 10
PROFET
™
+2 Arduino Shield with position of jumper J1
2.5.5
Push button (S1)
The option to solder a SMD push button at the placeholder S1 is also available. Additionally, a resistor(R
S1
= 82
kOhm) and a capacitor (C
S1
= 100 nF) are required to debounce the switch. Moreover, depending on the jumper
J2/J3 setting, the push button is available either on the digital input D2 (P1.4) or on the analog input A0 (P2.6).
PROFET
™
+2 12V Arduino Shield
2 Board description
User Manual
16
Rev. 1.00
2019-10-23
