1
Introduction
1.1
Overview
The PROFET
™
+2 Arduino Shield with BTS700x-1EPP adds advanced driving and diagnostic of generic loads to
the Arduino projects. The shield can be controlled with general logic IO-Ports of a microcontroller. Either an
Arduino Uno R3, the Arduino Due, the XMC
™
1100 Boot Kit or the more powerful XMC
™
4700 Relax Kit and
XMC
™
4800 Relax Kit from Infineon can be used as the master.
The board is available in different variations of the Smart High-Side Power Switch, depending on which of
Infineon's products the user wants to employ. Each one is built by a vertical N-channel power MOSFET with
charge pump. Due to the integrated charge pump the channels can be controlled by standard digital IOs (3.3 V
and 5 V supported). All of them are single channel devices with a very small ON-state resistance (e.g. the
BTS7002-1EPP with one 2.6 mΩ channel). The board can be bought with the following components:
•
BTS7002-1EPP (Nominal load current: 21 A)
•
BTS7004-1EPP (Nominal load current: 15 A)
•
BTS7006-1EPP (Nominal load current: 12.5 A)
•
BTS7008-1EPP (Nominal load current: 11 A)
The PROFET
™
+2 Arduino Shield can easily be connected to any Arduino compatible board like the XMC
™
1100
Boot Kit via headers.
PROFET
™
+2 12V Arduino Shield
1 Introduction
User Manual
2
Rev. 1.00
2019-10-23
