tinb21e1 (2016-06)
33
screen to set the analog output to 0.375 V as recorded by your
voltmeter, PLC, etc. Alternatively, if the analog output is used to
display the pressure in your PLC or system display console,
adjust the AOUT OFFSET so that your PLC also reads
0.0 mTorr.
4.4
Return to Factory Default Settings
You can reset all values to the original factory default settings by
simultaneously pressing the upper left and upper right soft-keys.
The user will then be prompted "Set Factory Defaults?" Choose
Yes or No.
If you reset all values to original factory default settings, you
would need to repeat the initial setup procedure as described in
section 4.1 and reprogram other parameters as required.
Summary of Contents for PGE500
Page 83: ...tinb21e1 2016 06 83 Notes...
