Operation
[email protected] | romanoff.com
7–8
7.4
System parameter
If you start from the main page and you press ‘Program Setup’ for five seconds
you get access to the system parameter level.
Figure 15: System parameter
Display-functions:
000:
00002
Selected parameter: 000
Value of parameter is 2, which means here thermocouple
type N is activated.
V
With pressing ‘arrow down’ you get to previous parameter (no
lower then 000).
Λ
With pressing ‘arrow up’ you get to next parameter 001.
-
With pressing ‘-’ you decrease the value to 1.
+
With pressing ‚+‘ you increase the value to 3.
Service
With pressing the button near to this word you see infor-
mation of ‚Service Info Page 1‘ with several serial numbers.
