Introduction:
The MyRide can only be connected to the internet via the ethernet (LAN)
connection; WiFi is not currently supported. Connecting the MyRide to the
internet will allow you to view RSS feeds and content from ICG by using
the MyWeb tab on the home screen.
1: Connect the MyRide to your Local Area Network
In order to connect the MyRide to the internet, you must have a Local Area
Network with DHCP (check with your network administrator if you are not
sure about your settings). To connect the MyRide, plug an ethernet cable
into the back of the MyRide that is connected to your router or other ac-
cess point.
2: Activate ‘MyWeb’ in the administrator settings
From the home screen, navigate to the administrator page by touching the
ICG logo in the lower-right corner of the screen, then touching the ‘MyRide
v3.0’ text in the upper-left corner of the screen. On the administrator
screen, choose the ‘General’ tab on the left side of the screen. Checking
the ‘Web Access’ check box activates the internet connection. (Unchecking
the check box later will disable MyWeb and remove the MyWeb option from
the home screen.)
Version 1.0 Copyright by Indoorcycling Group GmbH 2009
|
www.indoorcycling.com
ENG 22
MYWEB
1
ENG
h
MyRide V3.0
