Version 1.0 Copyright by Indoorcycling Group GmbH 2009
|
www.indoorcycling.com
ENG 17
MyRide 3wave
ASSEMBLY - wall mounted
3
Attention! the left and right support are
required to keep the required clearance
to the wall and avoid buckling of the
cables reaching out of the terminal
IMPORTANT ! The weight of the MyRide V3.0 of 92.5 lbs
requires the use of proper wall mounting fixtures sup-
porting the weight of the system. If you are unsure what
fixtures are suitable, please consult your local professi-
onal. Warranty may void in case of inproper mounting.
265 mm
1400 mm
Zoom
3: Prepare the wall anchors
Measure up 55“ (1400 mm) from the floor. Insert two wall anchors 10.5“ (265 mm)
apart, following the anchor manufacturer‘s directions. Note: the anchor must be rated
to support at least 100 lbs. Be sure the wall itself can support the weight of the stand!
4: Mount the MyRide to the wall anchors
With at least two people, lift the MyRide onto the wall anchors.
ENG
h
MyRide V3.0
