Version 1.0 Copyright by Indoorcycling Group GmbH 2009
|
www.indoorcycling.com
ENG 11
INTRODUCTION
Installation Guide
The MyRide V3
The MyRide V3 is a touchscreen media console for use as an exercise aid. The
system consists of an industrial computer and touchscreen, housed in a sheet metal
wave stand. The computer and touchscreen are fully connected and configured at the
factory, but the wave stand requires some assembly on-site.
Depending on mounting and other options, setup may take from 30 minutes to slightly
over one hour.
Setup Requirements
Tools and parts: All tools and parts necessary for assembling the wave stand are in-
cluded in the original shipping box.
Wall mounting the MyRide will require additional hardware and tools.
Customer Support
For the most-current customer support, please visit the website at https://secure.my-
rideportal.com. Basic maintenance and support questions are addressed in this ma-
nual. If your problem is not answered by these resources, or if your MyRide requires
service, please contact your distributor.
Installation Notes:
The MyRide personal training is a product for professional and / or commercial use.
Such training equipment is intended for use in training areas of organizations such as
fitness clubs or sport associations where access and control is regulated and the legal
responsibility for use lies with such club or association.
Foot print of MyRide 3wave:
86 x 56 cm / 34 x 22 inch
Weight of MyRide 3wave:
42kg / 92.5 Lbs
Height:
150cm
Foot print of MyRide 3wave + bike: approx. 200 x 65 cm / 79 x 26 inch
Weight of MyRide 3wave + bike:
approx.100 kg / 220 Lbs
ENG
h
MyRide V3.0
